| Applicable fluid : (Pneumatic type) Air, Non-corrosive gas Pressure port direction : Rear fitting(3-direction) Pressure port : Rc(PT)1/8 Connection type : Cable type(cable type cable: 2m) Pressure type : Standard pressure Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Current consumption : Max. 50mA Protection structure : IP40 |
| Sensing type : Diffuse reflective type Mounting height : 2.0 to 2.7m Light source : Infrared LED(850nm modulated) Power supply : 24-240VAC~ ±10% 50/60Hz 24-240VDC Power consumption : Max. 4VA(at 240VAC~) Control output : Relay(SPST(1a)) Environment_Ambient illumination : Sunlight/Incandescent lamp: Max. 3,000lx(receiver illumination) |
| Sensing type : Diffuse reflective type Mounting height : 2.0 to 2.7m Light source : Infrared LED(850nm modulated) Power supply : 12-24VAC~ ±10% 50/60Hz 12-24VDC Power consumption : Max. 2VA(at 24VAC~) Control output : Relay(SPST(1a)) Environment_Ambient illumination : Sunlight/Incandescent lamp: Max. 3,000lx(receiver illumination) |
| Sensing type : Through-beam type Sensing distance : 5m Sensing target : Opaque material of min. Ø10mm Light source : Infrared LED(940nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by control wire) Control output : PNP open collector |
| Sensing type : Through-beam type Sensing distance : 5m Sensing target : Opaque material of min. Ø10mm Light source : Infrared LED(940nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by control wire) Control output : NPN open collector |
| Sensing type : Diffuse reflective type Sensing distance : 200mm Sensing target : Opaque, Translucent material, Transparent material Light source : Infrared LED(940nm) Response time : Max. 3ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON(option: Dark ON) Control output : NPN open collector |
| Sensing type : Diffuse reflective type Sensing distance : 300mm Sensing target : Opaque, Translucent material Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : NPN open collector |
| Sensing type : Diffuse reflective type Sensing distance : 300mm Sensing target : Opaque, Translucent material Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : PNP open collector |
| Sensing type : Diffuse reflective type Sensing distance : 300mm Sensing target : Opaque, Translucent material Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : PNP open collector |
| Sensing type : Diffuse reflective type Sensing distance : 300mm Sensing target : Opaque, Translucent material Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : NPN open collector |
| Sensing type : Retroreflective type(built-in polarizing filter) Sensing distance : 3m(MS-2A) Sensing target : Opaque material of min. Ø75mm Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : NPN open collector |
| Sensing type : Retroreflective type(built-in polarizing filter) Sensing distance : 3m(MS-2A) Sensing target : Opaque material of min. Ø75mm Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : PNP open collector |
| Sensing type : Retroreflective type(built-in polarizing filter) Sensing distance : 3m(MS-2A) Sensing target : Opaque material of min. Ø75mm Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : PNP open collector |
| Sensing type : Retroreflective type(built-in polarizing filter) Sensing distance : 3m(MS-2A) Sensing target : Opaque material of min. Ø75mm Light source : Red LED(660nm) Response time : Max. 1ms Power supply : 12-24VDC ±10%(ripple P-P: max. 10%) Operation mode : Light ON/Dark ON(set by switch) Control output : NPN open collector |
